[T]
tclsh
[very interesting, you can program with loop control, expressions, etc from the IOS CLI. works on 3640-IS-M, Version 12.1(5)XM, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1))
test aaa group {group name} {username} {password}
[12.0(5)T] used to test the authentication of a username/password without having to use an extraneous process such as telnet or dialin to initiate it
test appletalk
[11.2.x] The test appletalk command will enter appletalk test mode. The sub-commands available in this mode are:
. arp interface-type number at-aarp-addr arp-mac-address
. eigrp neighbor-states cablestart-cableend
. nbp confirm <net>.<node>[:<skt>] <object>:<type>@<zone>
. nbp lookup <object>:<type>@<zone>
. nbp parmameters max-retrans max-replies interval
. nbp poll end
test align
test cable [atp | berr | bpimcast | brk | dhcp-inq | hop | minimum-poll | nobrk | stack-pro | ucc ]
[12.1]
atp acceptance test procedure
berr Bus Error
bpimcast Privacy Multicast test commands
brk Break
dhcp-inq Send DHCP inquiry
hop Initiate frequency hop
minimum-poll Toggle 1 second minimum polling
nobrk No Break
stack-prot Stack Protect
ucc Send UCC command
test call fallback
[12.1] VoIP Fallback
test cbus
For old AGS+ and 7000. Lets you prod stuff right into cbus memory. *very* dangerous if you don’t know what you are doing.
test cch323
command performs cch323 tests.
test crash
Makes the router crash anyway you want 
test crypto [dns-query] [engine] [initiate-session] [pki]
[12.1]
dns-query DNSSEC query
engine Crypto Engine
initiate-session Send a CIM connection message
pki PKI Client Test
test dhcp [allocate xxx.xxx.xxx.xxx] | [release] | [renew]
test dsp memory
[12.1] Test DSP memory
test eigrp as-number {ack | neighbor-states ipx-address ipx-mask}
[12.1] as-number id from 1 to 65535. neighbor-states is one of 1local (Neighbor states 1), 1successor (Neighbor states 3), 2local (Neighbor states 1 – 2), 2successor (Neighbor states 3 – 2), 3local (Neighbor states 1 – 0), 4local (Neighbor states 1 – 0 – 2), 5local (Neighbor states 1 – 0 – FC fail – 1), 6local (Neighbor states 1 – 2 – FC fail – 3), and delete (Delete a phoney entry in the topology table). The keyword ack toggles EIGRP fast acking.
test ifs appn {read | write}{hostname | ip-address}
The test ifs appn command reads or writes an appn file.
test ifs boot boot-command-line
The test ifs boot command parses the bootstrap ‘boot’ command line.
test ifs defaults
The test ifs defaults command shows the default boot files.
test ifs show hidden
The test ifs show hidden command toggles the display of hidden file systems and files.
test ifs slot slot url
The test ifs slot command will produce a core dump of slots on crashes.
test interfaces
test ip local-pool alloc (interface)
needs service-internal
test ip local-pool alloc user
needs service-internal
test ip local-pool chown (interface)
needs service-internal
test ip local-pool free (interface)
needs service-internal
test ip local-pool pool
needs service-internal
test ipc misc
test ipx capacity x y z
Generated IPX RIP and SAPs. Enterprise feature set (11.2+).
where x is the network address to begin at.
where y is the number of advertisements
where z is the interface IPX address that is reachable from
test ipx debug [0-ffffffff] [0-ffffffff] [0-ffffffff]
test ipx echo router-address [times-sent] [interval]
sends 1447 RIP requests for 1 – 182 random networks – remote end sends echo repl back (ipx ping works the same way, but it always requests network 00000000))
test ipx gns [type] [numb-tries] [timeout] [network-to-send-request-on]
types:
1 – User,
2 – User Group,
3 – Print Queue,
4 – File Server,
5 – Job Server,
6 – Gateway,
7 – Print Server,
8 – Archive Queue,
9 – Archive Server,
a – Job Queue,
b – Administration Object,
f – Novell TI-RPC,
ff – Wild,
ffff – Request Response
test ipx netbios find [name] [numb-tries] [timeout] [network-to-send-request-on]
sends out un-interpreted packets
test ipx query [sending-SAP-type] [type] [server-name] [network] [maskf] [numb-tries] [timeout]
sending-sap-types:
2 – Response (in),
4 – Nearest Server type,
C – General Name Query,
D – General Name Response,
E – Nearest Name Query,
F – Nearest Name Response
test ipx ripreq network
sends rip request for network specified
test ipx watchdog host-address
sends watchdog (IPX Keep-alive) packet to specified host)
test leds test network interfaces.
test mbus power [slot] [on off]
[no]Shut a line card
test memory
test pas [bus watcher] [counter] [eeprom]
[12.1]
bus watcher Bus Watcher
counter Cycle Counter
eeprom Test eeprom functionality
test playout [adaptive] [fixed] [nots]
[12.1]
adaptive use adaptive playout buffer
fixed use fixed playout buffer
nots use fixed playout buffer with no timestamps
test port <2147483647-0>
[12.1] Voice interface slot #
test pppoe [stop] [ip] <1-8000> [FastEthernet]
[12.1]
<1-8000> Number of PPPoE sessions to be opened
FastEthernet FastEthernet IEEE 802.3
test rsp cach memd-fastswitch uncached
The processor in the router has its own Cache. There were bugs in working with this cache. With this exec-command you can disable the use of this cache. Because this is a exec-command you have to type it again after a reboot.
test ssl [open-conn] [open-session] [read] [write]
[12.1]
open-conn Open connection
open-session Open a SSL Session
read Read data from a selected socket
write Write data to the selected socket
test tcp [delay|drop|line|random]
needs service-internal
test tone locale
[12.1]
locale 2 letter ISO-3166 country code
test translation-rule <1-2147483647>
[12.1]
<1-2147483647> The unique Tag for this translation table
test transmit
test spanning-tree [get] [process-stats] [switch-count]
[12.1]
get get configuration
process-stats Spanning tree process / queue statistics
switch-count Spanning tree packet counters
test modem back-to-back first-slot/port second-slot/port
performs modem testing. Test the transmission of L2 frames
test vines
enter VINES test mode. The Sub-commands available in this mode are:
. build [Build tables]
. checksum [Checksum test]
. data [Set data values used in various places]
. end [Exit VINES test mode]
. flush [Flush tables]
. generate [generate information]
. send [Send a VINES packet]
. set [Send a VINES value]
. ss [Do Server Service things]
. st [Send a vines streettalk packet]
test voice [echo] [playout] [port] [tone]
[12.1]
echo Test echo canceller
playout set playout delay configuration
port Diagnose voice ports by forcing conditions
tone TONE
test voip scripts
allow to run self-created IVR (Interactive Voice Response) scripts. Cisco included 7 IVR scripts in IOS. Self-created scripts must be specially signed. Issuing this command in priviliged mode before loading self-created script you turn off the signature checking procedure. The only problem is that the command must be issued every each router reboot. Cisco promises to remove totally the signature checking procedure in future IOS releases.
test vpdn
<cisco Systems on the test command>
“The undocumented and soon to be hidden ‘test’ privileged command is used to test subsystems, memory and interfaces. The features of the test command are box and IOS dependent and are intended for Cisco technical support only.”
<cisco Systems on the test command>
timeout absolute minutes [seconds]
[12.1] command is available to enforce timeouts on an interface.
trace display
Displays the trace buffer when connected with if-con 0 c
ttcp
Like the unix ttcp, to generate traffic
tunnel carry-security
CONFIG
